Welcome to the Quantec Nursecall Shop. Just Click & Buy and it arrives



NC803M Quantec Reset Key Pkof 5

Pack of 5 Magnetic reset keys for Door Monitoring Points and Magnetic Reset Call Points for both Quantec and Nursecall 800 Nursecall systems.

£20.00
(+ postage: £2.30)
Quantity:


Quantec Plug-in Call Lead 2mt NC805C-6

Plug-in Call Leads for the Quantec Nursecall system. The standard length is 2mt and 4mt & 6mt coiled lead options are also available (see options)

£16.20
(+ postage: £3.50)
Quantity:


Quantec Plug-in Call Lead 4mt NC805C-14

Plug-in Pear Push Call Lead for the Quantec Nursecall system. This is the 14 feet (4mt) version.

£18.50
(+ postage: £3.50)
Quantity:


Coiled Call Lead for Quantec 2mt NC805D

1.2mt to 2mt Coiled Extension Call Lead for use with both Quantec and Nursecall 800 Nursecall Call Points.

£20.54
(+ postage: £3.50)
Quantity:


QTN Replacement Locknuts for Quantec Call Points

Pack of 10 replacement locknuts for Quantec and Nursecall 800 call points in black. Price includes vat.

£12.00
(+ postage: £2.50)
Quantity:


Replacement Call Socket for call points QT5

Replacement Call Lead Sockets for Quantec Nursecall Call Points. Dome type nut. Pack of 5 sockets complete with locknut.

£17.50
(+ postage: £3.65)
Quantity:


ADSF 2 into 1 Call Lead Adaptor

2 into 1 Call Lead Adaptor ADSF to connect a Call Lead and Pressure Mat to the same call point. Easy to use and less obstructive than the ADS adaptor.

£5.00
(+ postage: £2.00)
Quantity:


Call Lead Extension Cable SJLE3

Extension Cable to extend your plug-in Call Lead by 3 metres. Can also be used for pressure mats.

£4.80
(+ postage: £3.00)
Quantity:


Quantec Ceiling Pull Switch QT607

This is the Ceiling Pull Switch for use with the Quantec Nursecall SYstem. The switch MUST be connected to a call point or reset point.

£22.00
(+ postage: £4.60)
Quantity:


NCP3 Pull Triangle for Pull Switches 2pk

Pack of 2 replacement Pull Triangles for ceiling pull switches. Price includes vat

£4.00
(+ postage: £2.20)
Quantity:


Bedside Pressure Mat PM2

This is a Bedside Pressure Mat (720mmx390mm) for use with the Quantec & Nursecall 800 systems. Measure 720mm x 380mm. Simply plugs into the call socket on the call point and is supplied with a 2 into 1 adaptor so that the call lead can still be used whilst the mat is plugged-in. Price includes VAT

£38.40
(+ postage: £8.50)
Quantity:


Quantec Call Point QT602DB

This is the standard, button reset Quantec Addressable Call Point. Complete with socket for a call lead and connections for a ceiling pull switch.

PLEASE NOTE that these are addressable units and you need to know how to programme them into the system.

£49.00
(+ postage: £4.60)
Quantity:


QT637 Quantec Euresis/Bed Sensor Interface

Multi-purpose Interface to connect Bed exit & Chair exit mats and Euresis mats to the Quantec nursecall system.

£78
(+ postage: £4.60)
Quantity:


QT634 Chair Exit Pressure Mat for Quantec

Chair Exit Mat for use with Quantec nursecall systems. When a patient gets out of the chair the change in pressure will cause the mat to trigger an alarm when plugged into the bedside call point.

PLEASE NOTE THAT THIS MAT REQUIRES THE QT637 or QT637 INTERFACE TO OPERATE THE SYSTEM.

£32.40
(+ postage: £9.00)
Quantity:


Quantec QT644 Heavy Duty Pressure Mat

Bedside Pressure Mat (910mmx610mm) for heavy duty use with the Quantec & Nursecall 800 Nursecall systems. Wipe clean surface with a rubber non-slip underside.

£116.10
(+ postage: £17.00)
Quantity:


QT633 Bed Exit Mat (lays in the bed)

This mat lays in the bed and when the resident rises the mat triggers a call on the nursecall system via a QT636 or QT637 Interface. The Interface MUST be installed for this mat to work.

£36.00
(+ postage: £11.00)
Quantity:


Quantec QT635 Euresis Bed Wet Sensor

Quantec Euresis Bedwet Sensor for use with the QT637 Interface Unit.

PLEASE NOTE THAT THIS SENSOR WILL NOT WORK WITHOUT THE QT637 INTERFACE.

£30.00
(+ postage: £9.00)
Quantity:


Silent Minder Movement Sensor Q

Infrared Movement Sensor (battery powered) to go next to the bed or over the bed. There is a time delay when turned on to allow the nurse to leave the romm before activation. Plugs in to the call socket on the call point. Please be sure to state the make of your system when ordering to ensure the correct connection cable.

£102.00
(+ postage: £4.6)
Quantity:


Infrared Neck Pendant Transmitter QT432

Infrared Neck Pendant Transmitter for use with Quantec Nursecall system. Whe the button on the pendant is pressed a call is made on the call point in the room.

£50.40
(+ postage: £3.60)
Quantity:


Neck Pendant Transmitter with attack QT412RXA

Staff Attack Neck Pendant for use with Quantec. When the button on the pendant is pressed or the pendant is pulled an attack call is made on the system.

£100.80
(+ postage: £3.60)
Quantity:


Neck Pendant Trans with call/attack QT412RXCA

Staff Call/Attack Neck Pendant for use with Quantec. When the button on the pendant is pressed a standard call is made and when the pendant is pulled an attack call is made on the system.

£100.80
(+ postage: £3.60)
Quantity:


Infrared Wrist Transmitter QT432W 

Infrared Wrist Transmitter with wrist strap for use with Quantec Nursecall system. When the button on the transmitter pressed a call is made on the call point in the room.

£54.40
(+ postage: £3.60)
Quantity:


Quantec Door Monitoring Point QT604

Door Monitoring Call Point for use with the Quantec Addressable Nursecall system. This unit would connect to a magnetic contact on a door to signal when a door is opened by an unauthorised person. Magnetic contacts are also available from our shop. The alarm can be disabled using the keyswitch.

PLEASE NOTE that these are addressable units and you need to know how to programme them into the system.

£46.00
(+ postage: £4.60)
Quantity:


Quantec Button Reset Call Point (no socket) QT609

Quantec Button Reset Call Point without the call socket.

PLEASE NOTE that these are addressable units and you need to know how to programme them into the system.

£40.00
(+ postage: £4.60)


Quantec Nursecall Display Panel QT608C

This is the QT608C corridor Display Panel for the Quantec Addressable Nursecall System.This panel has control buttons to accept calls

£252.00
(+ postage: £5.10)
Quantity:


Quantec Overdoor Light with Sounder QT606A

This is the addressable Overdoor Light Unit with built-in Sounder for use with the Quantec Nursecall system.

£50.00
(+ postage: £4.50)
Quantity:


Quantec Magnetic Reset point with Sounder QT602SM

Quantec Magnetic Reset Call Point with in-built sounder.

PLEASE NOTE that these are addressable units and you need to know how to programme them into the system.

£45.00
(+ postage: £4.50)
Quantity:


Quantec Overdoor Light Unit QT606

This is the standard addressable Overdoor Light Unit for use with the Quantec Nursecall system.

£26.57
(+ postage: £4.60)
Quantity:


Front Membrane for Call Points 2 pk QTSKIN1

Pack of 2 replacement Mebranes/Skins for Quantec and Nursecall 800 call points. Easy to fit. Price includes vat

£6.00
(+ postage: £1.80)
Quantity:


Quantec Addressable Sounder QT688

This is the Addressable Remote Sounder for the Quantec system. This allows additional sounder coverage for calls where a display panel is not local.

PLEASE NOTE that these are addressable units and you need to know how to programme them into the system.

£49.20
(+ postage: £4.60)
Quantity:


Quantec Main Control Unit QT601-2

Quantec Power supply & Control Unit. This is the main unit that all call points and display panels operate from.

PLEASE NOTE that these are addressable units and you need to know how to programme them into the system.

£576.00
(+ postage: £16.00)

Quantec Nursecall Display Panel QT608CD

This is the QT608C corridor Display Panel for the Quantec Addressable Nursecall System. This panel has no control buttons

£252.00
(+ postage: £5.10)
Quantity:

Make payments with PayPal - it's fast, free and secure!